 |
|
| |
|
|
业务洽谈：
联系人：张顺平
手机：17727550196（微信同号）
QQ:3003262363
EMAIL:zsp2018@szczkjgs.com
联系人：鄢先辉
手机：17727552449 （微信同号）
QQ:2850985542
EMAIL:yanxianhui@szczkjgs.com
负责人联络方式：
手机：13713728695（微信同号）
QQ:3003207580
EMAIL:panbo@szczkjgs.com
联系人：潘波 |
|
|
| |
|
 |
|
 |
当前位置：首页 -> 方案设计 |
|
|
| NCP1397采用GaN HEMT器件电源参考设计 |
|
|
| 文章来源： 更新时间：2015/4/10 9:34:00 |
|
On Semi公司的NCP1397高性能电源转换控制器,集成了600V栅极驱动器,简化了PCB布局和降低外接元件数量,工作频率从50 kHz到500 kHz,开关频率精度±3%,主要用在平板显示器电源,大功率AC/DC转换器,计算机电报挂号源,工业和医疗设备电源,离线电池充电器.本文介绍了NCP1397主要特性, 内部框图, 典型应用电路图以及高压驱动器评估板NCP1397GANGEVB主要特性,电路图和材料清单.
The NCP1397 is a high performance controller that can be utilized in half bridge resonant topologies such as series resonant, parallel resonant and LLC resonant converters. It integrates 600 V gate drivers, simplifying layout and reducing external component count. With its unique architecture, including a 500 kHz Voltage Controlled Oscillator whose control mode permits flexibility when an ORing function is required, the NCP1397 delivers everything needed to build a reliable and rugged resonant mode power supply. The NCP1397 provides a suite of protection features with configurable settings to optimize any application. These include: auto-recovery or fault latch-off, brown-out, open optocoupler, soft-start and short-circuit protection. Deadtime is also adjustable to overcome shoot through current.
NCP1397主要特性:
• High−Frequency Operation from 50 kHz up to 500 kHz
• 600 V High−Voltage Floating Driver
• Adjustable Minimum Switching Frequency with ±3% Accuracy
• Adjustable Deadtime from 100 ns to 2 _s.
• Startup Sequence Via an Externally Adjustable Soft−Start
• Brown−Out Protection for a Simpler PFC Association
• Latched Input for Severe Fault Conditions, e.g. Over Temperature orOVP
• Timer−Based Input with Auto−Recovery Operation for DelayedEvent Reaction
• Latched Overcurrent Protection
• Disable Input for Immediate Event Reaction or Simple ON/OFFControl
• VCC Operation up to 20 V
• Low Startup Current of 300 _A
• 1 A/0.5 A Peak Current Sink/Source Drive Capability
• Common Collector Optocoupler Connection for Easier ORing
• Optional Common Emitter Optocoupler Connection
• Internal Temperature Shutdown
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHSCompliant
NCP1397应用:
• Flat Panel Display Power Converters
• High Power ac−dc Adapters for Notebooks
• Computing Power Supplies
• Industrial and Medical Power Sources
• Offline Battery Chargers
NCP1397终端产品:
Notebook Adapters
LCD TVs
ATX power supplies
图1.NCP1397A内部框图
图2. NCP1397B内部框图
图3. NCP1397典型应用电路图
高压驱动器评估板NCP1397GANGEVB
The NCP1397GANGEVB reference design provides a 12 V/20 A power supply using Gallium Nitride (GaN) HEMTs as the switching devices. The front-end of the power converter converts a universal AC line to a 385 dc bus while achieving near unity power factor. The second stage is a DC-DC stage that converts the 385 V DC bus to a 12 V output with a max rated load current of 20 A.
The Boost PFC stage employs ON Semiconductor’s NCP1654 CCM controller. The second stage is an isolated DC-DC converter that converts the 385 V dc bus to a 12 V dc voltage output and employs ON Semiconductor?s NCP1397 LLC controller. Synchronous rectification is achieved with the NCP4304 synchronous controller on the secondary side to improve efficiency. The NCP432 is utilized in the feedback path to regulate the output voltage. The board utilizes GaN HEMTs as the switching devices in both the PFC stage and in the primary side of the LLC stage.
图4.评估板NCP1397GANGEVB外形图
图5.评估板NCP1397GANGEVB电路图(1)
图6.评估板NCP1397GANGEVB电路图(2)
图7.评估板NCP1397GANGEVB电路图(3)
评估板NCP1397GANGEVB材料清单:
|
|
| |
| |
|
|
|
